Hitachi ZAXIS 200LC

Key Features:

  • Higher Productivity - Zaxis uses the latest technologies to achieve lower total operational costs while boosting productivity. Arm digging and bucket digging forces have been increased by 10% and 12% respectively by increasing the hydraulic cylinder diameter.
  • Cab Comfort - The easy-to-read monitor panel and switches are located near the operator to minimize fatigue and enhance operator control. The Autocontrol air conditioner allows you to set a specific temperature, then forget it. Bi-level air ducts are positioned throughout the cab to promote even air flow. The comfortable seat now reclines up to 40 degrees and has wider armrests. Noise level inside the cabin at the operator's ears is a quiet 67 dB.
  • Cab Safety - The CRES (Center pillar Reinforced Structure) rigid cab is designed with safety in mind. The closed-section pillar and reinforcing members at central areas withstand vertical and horizontal external forces. This can help reduce the potential of operator injury in the event of an accident.


Smarter, faster, more productive yet more efficient–the versatile Hitachi Zaxis 200LC can be found at construction sites all over the world. Boasting a cleaner yet more powerful engine and a host of new items as well as significant refinements, Zaxis is the next generation in excavator development.

Equipment Information

Download Spec Sheet (pdf)


Manufacturer and Model:Isuzu AA-6BG1T
Type:4-cycle water-cooled, direct injection
Aspiration:Turbocharged, intercooled
No. of cylinders:6
Maximum torque:405 lbf•ft (56 kgf•m) @ 1,600 rpm (min-1)
Piston Displacement:396 in3 (6.494 L)
Bore and stroke:4.13” x 4.92” (105 mm x 125 mm)
Batteries:2 x 12 V, 97 AH
Governor:Mechanical speed control by stepping motor

Hydraulic System

Main Pumps:2 variable-displacement axial-piston pumps
Max. oil flow:2 x 51.3 US gpm (2 x 194 L/min, 2 x 42.7 lmp gpm)
Pilot Pump:One gear pump
Max. oil flow:8.5 US gpm (32 L/min, 7.0 lmp gpm)
Hydraulic Motors Travel:2 variable displacement axial piston motors
Hydraulic Motors Swing:1 axial piston motor
Relief Valve Settings Implement circuit:4,980 psi (350 kgf/cm2)
Relief Valve Settings Swing circuit:4,410 psi (310 kgf/cm2)
Relief Valve Settings Travel circuit:4,980 psi (350 kgf/cm2)


Upper rollers (Per Side):2
Lower rollers (Per Side):8
Track shoes (Per Side):49
Track guard (Per Side):2